Skip to product information
1 of 3


Osburn Matrix 2700 Wood Insert

Osburn Matrix 2700 Wood Insert

Regular price $3,899.00
Regular price Sale price $3,899.00
Sale Sold out
Shipping calculated at checkout.

Door Overlay - Required

-- Please Select --

No, Thank You


Venting Options

  • Free Shipping on Orders Over $300
  • Same-Day Order Processing

Osburn products are made to order. The estimated lead time is 12-18 weeks.


Inspired by nature, the Matrix 2700 insert is a fusion of traditional style and technological innovation. Located in the heart of your living space, the generous viewing area of the Matrix 2700 will invite you to sit back, relax and take in the calm and warmth of its flames. Eco-savvy consumers will appreciate its efficient combustion, quality performance, and classic beauty.

This unit comes standard with a cast iron faceplate and heat-activated blower. Customize the look of this non-catalytic appliance by choosing from a black or brushed silver-plated door overlay and fire screen.

Required to complete the woodstove:

  • Door overlay

        Appliance Performance
        Fuel type : Dry cordwood
        Recommended heating area-ft² : (*) 750 - 2,200
        Overall firebox volume : 2.5
        EPA loading volume-ft³ : 1.69
        Maximum burn time : (*) 8 h
        Maximum heat output (dry cordwood) : (2) 80,000 BTU/h (23.4 kW)
        Overall heat output rate < : (2) (3) 14,200 BTU/h (4.16 kW) to 48,200 BTU/h (14.13 kW)
        Average overall efficiency (EPA cribs/Douglas fir) : (3) N.A. (HHV) (4) N.A. (LHV) (5)
        Average overall efficiency (dry cordwood) : (3) 68 % (HHV) (4) 73 % (LHV) (5)
        Optimum efficiency : (6) (7) 74 %
        Average particulate emissions rate : (8) 1.14 g/h
        Average CO : (9) 53 g/h

        (1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

        (2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb./ft³ and 20 lb./ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb./ft³ and 12 lb./ft³. The moisture content is between 19% and 25%.

        (3) As measured per CSA B415.1-10 stack loss method.

        (4) Higher Heating Value of the fuel.

        (5) Lower Heating Value of the fuel.

        (6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

        (7) Optimum overall efficiency at a specific burn rate (LHV).

        (8) This appliance is officially tested and certified by an independent agency.

        (9) Carbon monoxide.

        General Features
        Combustion technology Non-catalytic
        High-efficiency certified appliance Yes, EPA 2020 approved
        Maximum log length 20"
        Log positioning Loading over width
        Chimney diameter 6"
        Flue outlet diameter 6"
        Type of chimney Liner - ULC-S635, CAN/ULC-S640, UL1777
        Minimum chimney height (feet) 15'
        Baffle type C-Cast
        Approved for a mobile home installation No
        Shipping Weight 535 lb. (243kg)
        Door type Single, glass with cast iron frame
        Glass type Ceramic glass
        Glass surface – dimensions (Width X Height) 24 3/8" X 12 5/8"
        Glass air-wash system Yes
        Premium quality blower included (CFM) 176
        Overall dimension (Height) 30 1/8"
        Overall dimension (Width) 43 5/8"
        Overall dimension (Depth) 27 1/4"
        Door opening – dimension (Height) 10 1/2"
        Door opening - dimension (Width) 25 3/8"
        Firebox – dimension (Height) 12 3/8"
        Firebox – dimension (Width) 22 5/8"
        Firebox – dimension (Depth) 12 7/8"
        Moulded refractory bricks Yes
        Stainless-steel secondary-air system improving gas combustion Yes
        Adjustable threaded legs Yes
        Fireplace opening – minimum (Height) 27 1/8"
        Fireplace opening – minimum (Width) 31 3/4"
        Fireplace opening – minimum (Depth) 22 1/8"
        USA standard (emissions) EPA
        Canadian Standard (emissions) CSA B415.1-10
        USA standard (safety) UL 1482, UL 737
        Canadian standard (safety) ULC S628
        Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
        Warranty Limited lifetime
        Minimum clearances to combustibles*
        (Data expressed in inches. 1 inch = 25.4 mm)
        Canada United-States
        Clearance – top (measured from the platform on which the appliance is installed)** 84" 84"
        Clearance – combustible side mantle to unit 9 1/2" 9 1/2"
        Clearance – combustible top mantle to unit 12" 12"
        Clearance – combustible side wall to unit 19" 19"
        Clearance – minimum floor protection in front of the appliance 18" 16"

        * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

        ** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.



        80,000 BTU

        Heating Capacity

        750-2,000 sq ft

        Firebox Size

        2.5 cu ft

        Log Length

        up to 20”

        Flue Pipe Diameter



        490 lbs




        24 7/8”


        24 3/4”


        Matrix 2700 Wood Insert with Brushed Nickel Door Overlay

        Matrix 2700 Wood Insert with Black Door Overlay.


        Click to see options

        2" or 4" Projection Kit for Insert

        --- for use with inserts that need to protrude from the fireplace opening

        34'' X 50'' Cuttable Faceplate

        --- covers the gap between the insert and the fireplace

        5" Fresh Air Intake Kit

        --- recommended to reduce or eliminate negative pressure problems

        5'' Fresh Air Intake Register with Airtight Damper

        --- allows outside combustion air to feed the appliance

        Rigid Firescreen

        --- easy to remove screen allows door to be opened for fire viewing

        Offset Liner Adaptor

        --- allows your flexible liner to be offset to the rear of an insert outlet.


        Click to see accessories

        Adhesives, Gaskets and Insulation

        High Temperature Red Silicone (300 ml - 10.1 fl.oz.)

        High Temperature Clear Silicone (300 ml - 10.1 fl.oz.)

        Maintenance Products

        6" Round Brush with Polypropylene Bristles (3/8" NPT)

        --- efficiently cleans chimneys

        Pull Ring (3/8" NPT)

        --- securely connects to brushes and give you that extra safety while you use your chimney rod

        5' Fibreglass Rod (3/8'' NPT)

        --- perfect rod for cleaning chimneys

        Kevlar Thread Wood Stove And Fireplace Gloves

        --- gloves are recommended for a safe and clean use with any type of wood-burning appliance.

        19" Kevlar Thread Sewn Fireplace Gloves

        --- strong and flexible glove with reinforcement at the level of the hand

        Dry Cleaning Pad

        --- easily cleans the soot from glass without water

        Wood Appliance Glass Cleaner (500ml - 16.9fl.oz.)

        --- recommended for cleaning the glass of any type of wood-burning appliance


        Digital Moisture Reader

        --- accurately measures moisture content in wood logs. Wood should be below 20% humidy content


        60" Washed Cedar Non-Combustible Mantel

        72" Washed Cedar Non-Combustible Mantel

        60" Tavern Brown Non-Combustible Mantel

        72" Tavern Brown Non-Combustible Mantel

        Fire Starters

        Sachet Pouches Fire Starter

        Wood and Paraffin Fire Starter Cubes

        --- safe, odorless, soot less, strong burning; can be stored indefinitely and does not dry out


        View full details