Skip to product information
1 of 1

SKU:OP00030

Osburn 3000 Pellet Stove

Osburn 3000 Pellet Stove

Regular price $3,699.00
Regular price Sale price $3,699.00
Sale Sold out
Shipping calculated at checkout.
  • Free Shipping on Orders Over $300
  • Same-Day Order Processing

Osburn products are made to order. The estimated lead time is 12-18 weeks.

OVERVIEW

If you love the look and feel of a wood stove, but are attracted to the convenience offered by pellets, then the OSBURN 3000 PELLET STOVE is for you..

The Osburn 3000 displays a classic wood stove appearance, and is aesthetically consistent with other members of the Osburn product family. However, within this classic wood stove design exists state-of-the-art components for achieving the unparalleled performance and convenience of a pellet stove..

Notable internal features include a bottom-feed fuel delivery system, sophisticated electronics for greater convenience and an air wash system for keeping the large glass viewing door clean. The Osburn 3000, a must for eco-friendly heating!

        Appliance Performance
        Fuel type : Pellet (Premium grade or better) (2)
        Recommended heating area-ft² : (*) 500 - 2,200
        Hopper capacity : 55 lb (25 kg)
        Maximum burn time : (*) 45 h
        Maximum heat input rate : (3) 43,000 BTU/h (12.6 kW)
        Overall heat output rate < : (4) 6,400 BTU/h (1.9 kW) to 29,300 BTU/h (8.6 kW)
        Average overall efficiency : (5) 69.8% (HHV) (6) 75.3% (LHV) (7)
        Optimum efficiency : (8) (9) 77.2%
        Burn rate : 1.2 lb/h - 5.0 lb/h
        Average particulate emissions rate : (10) 2.9 g/h
        Average CO : (11) 41.2 g/h
        Average electrical power consumption for ignition cycle : (12) 3.1A (372W)
        Average electrical power consumption for continuous operation : (12) 2.3A (90W) - 3.1A (174W)

        (1) Values are as measured per CSA B415.1-10, except for the recommended heating area, hopper capacity, maximum burn time and maximum heat input rate. Results may vary depending on pellet quality, density, length, and diameter.

        (2) Grades of pellet fuel are determined by organizations such as Pellet Fuels Institute (PFI), ENplus and CANplus.

        (3) Based on the maximum burn-rate and a dry energy value of pellet at 8,600 BTU/lb.

        (4) As measured per CSA B415.1-10 stack loss method.

        (5) Efficiency based on radiated and delivered heat when allowing cycling from high to low burn to simulate thermostat demand.

        (6) Higher Heating Value of the fuel.

        (7) Lower Heating Value of the fuel.

        (8) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

        (9) Optimum overall efficiency at a specific burn rate (LHV).

        (10) This appliance is officially tested and certified by an independent agency.

        (11) Carbon monoxyde.

        (12) Unless stated otherwise, measures were taken directly at the main power source and include all electrical components present in the appliance.

        General Features
        Combustion technology Bottom-feed
        High-efficiency certified appliance CSA B415.1-10
        Electronic igniter Yes
        Flue outlet diameter 3"
        Type of chimney ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L)
        Baffle type Stainless steel
        Approved for an alcove installation Yes
        Approved for a mobile home installation Yes, with fresh air intake
        Shipping Weight 367 lb (167 kg)
        Door type Single, glass with cast iron frame
        Glass type Ceramic glass
        Glass surface – dimensions (Width X Height) 13 3/8" X 7 3/4"
        Glass air-wash system Yes
        Premium quality blower included (CFM) 176
        Noise level at 6 feet 47 dBa (+/- 3 dBa) - 59 dBa (+/- 3 dBa)
        Overall dimension (Height) 32 5/8"
        Overall dimension (Width) 24 3/8"
        Overall dimension (Depth) 30 5/8"
        Adjustable threaded legs No
        Easy-to-access ash drawer N.A.
        Voltage and frequency 120 VAC - 60 Hz
        AC Current 2.3A/120 VAC - 3.1A/120 VAC
        Main control board fuses 7.5A - 250V
        Canadian Standard (emissions) CSA B415.1-10
        USA standard (safety) UL 1482, ASTM E1509
        Canadian standard (safety) ULC S627
        Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
        Warranty Limited lifetime
        Minimum clearances to combustibles*
        (Data expressed in inches. 1 inch = 25.4 mm)
        Canada United-States
        Clearance – back wall 3" 3"
        Clearance - corner 3" 3"
        Clearance – side wall 6" 6"
        Clearance – top (measured from the platform on which the appliance is installed)** 48" 48"

        * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

        ** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

        Specifications

        BTU

        43,000

        Heating Capacity

        500-2,200 sq ft

        Loading Capacity

        55 lbs

        Maximum Combustion Time

        45 hrs

        Flue Pipe Diameter

        3”

        Weight

        386 lbs

        Width

        24 3/8”

        Depth

        30 5/8”

        Height

        32 5/8”

        Mobile Home Approved

        Yes

        Options

        Click to see options

        2" X 25' Anti-Static Flex Hose

        3" X 10' Insulated Flex Pipe for Fresh Air Intake Kit

        3" X 5' Fresh Air Intake Kit


        Digital Wall Thermostat

        --- always displays ambient temperature

        Glass Hearth Pad 10mm - 44" X 36"

        --- Offers a contemporary alternative to traditional hearth boards

        Leg Assembly for AC01463 Discharge Tank

        --- Allows for floor-based installation

        Programmable Thermostatic Remote Control

        Stand Alone Auxiliary Discharge Tank

        --- unit contains all the necessary elements to be hung on the wall

        Storage Tank Extension for AC01460

        --- Gives the equivalent to one ton of pellets in total

        Storage Tank with Pneumatic Self-Feeding Pellet System

        --- Allows long heating autonomy for pellet appliances


        Accessories

        Click to see accessories

        Adhesives, Gaskets and Insulation

        High Temperature Red Silicone (300 ml - 10.1 fl.oz.)

        High Temperature Clear Silicone (300 ml - 10.1 fl.oz.)

        Paint

        Metallic Black Stove Paint – 342g (12oz) Aerosol

        Metallic Black Stove Paint – 85g (3oz) Aerosol

        Maintenance Products

        Stove and Furnace Cement (300ml - 10.1fl.oz.)

        --- helps prevent smoke and air leaks

        Ash Vacuum Cleaner

        --- designed almost exclusively for ash collection

        3'' Pellet Stove Cleaning Kit

        5' Pellet Stove Flexible Rod (1/4"-20 Thread)

        Dry Cleaning Pad

        --- easily cleans the soot from glass without water

        Pellet Appliance Glass Cleaner (500 ml - 16.9 fl.oz.)

        Hearth Pads

        Modular Floor Protection System

        --- easy to assemble modular panel construction and simple clip together design requires no fasteners

        Heat Shields

        Certified Modular Heat Shield System Extension

        --- reduces clearances by up to 87.5% which includes mounting support brackets and hardware

        53" X 58 1/2" Certified Modular Heat Shield System


        Click HERE to shop for more Accessories.

        Downloads:

        3000 Pellet Stove Installation Manual

        3000 Pellet Stove Operation Manual

        3000 Pellet Stove Dimensions

        View full details